Baldor EM3771T 10HP, 3485RPM, 3PH, 60HZ, 215T, 0730M, TEFC, F1 Draft Inducers

Baldor EM3771T 10HP, 3485RPM, 3PH, 60HZ, 215T, 0730M, TEFC, F1 Draft InducersSpecs Catalog Number EM3771T Enclosure TEFC Frame 215T Frame Material Iron Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 10. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ 230. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead

0x(Code J) No load current 31

5 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3738M Mounting Arrangement F3 Number of Poles 4 Overall Length 15

Frame Material Cast Iron Impregnation Method Dip and Bake Polyester Main terminal box hole NPT 1" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 202P (ISO 12944 - C4) Grounding Lugs Single Fan Cover material Steel Tropicalized Painting Without Fan material Plastic Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Winding thermal protection Thermostat - 2 wires 1 per phase 155°C Balancing Method 1/2 Key Drip Cover Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 6 Downloads

CPX32366T HP 30//25 VOLTS 230/460//190/380 AMPS 78/39 RPM 1180//980 HZ 60//50 SER

2 POLES 6 NUMBER SPEEDS 1 RPM 1175 RPM 2 1175 HERTZ 60 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 FRME 213 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DI OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6208-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

Standard NEMA MG-1 Frequency 60 Hz Voltage 460 V Number of poles 12/6 Degree of Protection IP55 Synchronous speed 600/1200 rpm Output rating 5

Rated current 105 A Reference CWM Main contact 3 NO Control voltage 400-415V 50Hz/480V 60Hz Terminal type Screw Attributes

0 V @ 60 HZ XP Class and Group None XP Division Division II Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Current @ Voltage 115

Model_Number DA98 PRODUCT NAME 7

automatic Shaft Material AISI 304 Stainless Steel Painting Munsell N 1 - Matte 207N (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Steel Tropicalized Painting Without Fan material Plastic Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Resilient Base Without Overload protector (phenolic) Automatic Features

6 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP55 KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 5400 rpm Motor Lead Termination Flying Leads Motor Type 0726M Mounting Arrangement F1 Number of Poles 2 Overall Length 20

Frame Material Cast Iron Impregnation Method Constant Resin Flow Regreasing System At Drive end and Non-drive end Main terminal box hole NPT 3" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 203A (ISO 12944 - C2) Grounding Lugs Double Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover With Overload protector (phenolic) Without overload protector Connection Cables Quantity 6 Downloads