Bando 2198-14M-115 14M HT Timing Belt FLANGESBando 2198 14M 115 Synchro Link HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds. The rounded tooth profile meshes precisely with matching pulley grooves so there is no belt creep or slip to cause speed variation. HT belt drives are 99% efficient, leading to significant energy savings on high horsepower
Model_Number GB95 PRODUCT NAME 15 HP - TEFC-IP55 - 1775 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 15 KILOWATTS 11
4x(Code J) No load current 140 A Rated torque 880 ft
Bando - 10B79 To resolve problem applications where belts are flipping over or jumping out of the sheaves
639 HUB W/ 35EP3702A01SP PU EP-205 BRG-35X-56C-143-5TC 35CB3001A01SP EXPL CONDUIT BOX
Load 75° C Start Configuration DOL Break-Down Torque 21 LB-FT Pull-Up Torque 18 LB-FT Locked-Rotor Torque 25 LB-FT Starting Current 85 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
40J098X775G1 HP 15 VOLTS 230/460 AMPS 41/20
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 18
Morrill MotorsSPB12HMA1
lb Locked rotor torque 150 % Breakdown torque 190 % Locked rotor time 45s (cold) 25s (hot) Moment of inertia (J) 7
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1774 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
5x(Code H) No load current 8
3 LB-FT Locked-Rotor Torque 4
