Century D1056 Fan and Blower Motor, 1/2 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 3 Speed, 48 Frame, OPEN JET PUMP

Century D1056 Fan and Blower Motor, 1/2 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 3 Speed, 48 Frame, OPEN JET PUMPFan Coils Dual Wheel Blower Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 7. 5 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Design Upgrade, Converting From Sleeve Bearing to Ball Bearing 1 2" Diameter Shaft with Flat 26" Leads Extended Studs Shaft End, Resilient Ring Mounting, Belly Band Mounting (Belly Band Not Included) Additional Information Thermal

27 IN Power Factor 78 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code D-Flange Pulley Shaft Indicator Tapped & Key Rodent Screen None Service Factor 1

Catalog Number ECS101T2H1DF4 Enclosure TEFC Frame 143T Frame Material Steel Frequency 60

37J639T384G1 HP 7

Standard NEMA MG-1 Frame 56J Frequency 60 Hz Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Mounting F-1/B14R(D) Terminal box¹ Left position Enclosure TEFC Attributes

lb Locked rotor torque 290 % Breakdown torque 290 % Locked rotor time 61s (cold) 34s (hot) Moment of inertia (J) 0

35 SHIPPING WEIGHT 13 THERMAL PROTECTION NONE BREAKDOWN TORQUE 38

748 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1700 rpm Speed Code Single Speed Motor Standards IEC Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

Amperes 1886 A LRC 6

A44-7089-2866 HP 350 RPM 3570 DRIVE END BEARING 65BC03J30X OPP D

Model_Number 7200 PRODUCT NAME 7

5 RPM 1750 FRAME 184 SER

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA CSA EEV UR Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 5