Genteq 3459HS HEAT SHIELD® Condenser Fan Motor, 1/3-1/8 HP, 1 Ph, 60 Hz, 208-230 V, 825 RPM, 1 Speed, 48 Frame, TEAO Hazardous Location Motor

Genteq 3459HS HEAT SHIELD® Condenser Fan Motor, 1/3-1/8 HP, 1 Ph, 60 Hz, 208-230 V, 825 RPM, 1 Speed, 48 Frame, TEAO Hazardous Location MotorHeat Shield Condenser Fan Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 10 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Totally Enclosed Air Over Class B Insulation, 70C Ambient Ball Bearing 1 2" Diameter Shaft with Double Flat 48" Leads Shaft Down, Extended Clampbolts, Mounting Holes in Shell, Belly Band Mounting (Belly Band Not Included) Additional Information Thermal ProtectionThermally Protected

375 MOUNTING RIGID MOTOR TYPE FHP OPPOSITE END BEARING 6203 SHAFT END BEARING 6203 AMBIENT 40 ROTATION REVERSIBLE SERVICE FACTOR 1

MountingRound

Male AMP Terminals

Frame 444/5TS Output 200 HP (150 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1480 rpm Slip 1

CBXM18342T HP 3//2 VOLTS 230/460//190/380 AMPS 8

lb Locked rotor torque 220 % Breakdown torque 250 % Locked rotor time 19s (cold) 11s (hot) Moment of inertia (J) 66

48 IN Power Factor 87 Product Family FARM DUTY Pulley End Bearing Type Ball Service Factor 1

Type Undervoltage Rated voltage 110-130 V 50/60 Hz-DC Application Molded Case Circuit Breakers Product reference DWB160-250 Attributes

91 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

lb Locked rotor torque 150 % Breakdown torque 229 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 94

2 A @ 460 V Design Code B Drip Cover No Drip Cover Duty Rating CONT Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code F Lifting Lugs Standard Lifting Lugs Motor Type M Mounting Arrangement V1 Number of Poles 6 Overall Length 37

Load 29° C Start Configuration DOL Break-Down Torque 10 LB-FT Pull-Up Torque 5