Blue Robotics BlueRov2 Enclosure Only Tube:Acrylic - 100m

Blue Robotics BlueRov2 Enclosure Only Tube:Acrylic - 100mPre wired and tested with all of the BlueROV2 electronics, this enclosure is ready to integrate into your custom ROV frame or other application. This includes the 18 hole end cap with nothing installed. At minimum, we recommend including a Pressure Relief Valve or M10 Enclosure Vent and Plug, a pressure sensor like the Bar30 High Resolution 300m Depth Pressure Sensor and the Power Cable Set to connect to a battery enclosure. Rated to 100 m (330 ft)

2 x 8-Circuit Barrier Block

This moldable sealing compound can be used to seal all kinds of connections quickly and effectively

Just connect the yellow signal wire to the power wire and it will turn on

It has preinstalled WetLink Penetrators and 5

Hard Plastic shockproof flight case with easy double throw latches and pull handle with wheels

Cable also has another pair of wires for supplying power

Battery Voltage @ 10 A (Fuse Board)

6 x M3x12 screws

1 x Hard Case

This guard protects the binder connector on the slip ring of the Fathom Spool

Your cable must have a bondable jacket (preferably polyurethane) and have a diameter no larger than 6

Absolute Maximum Range