Bando P32H200 SK QD Timing Belt Pulley (SK) 170mm WideBando P32H200 SK The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Model_Number DT37 PRODUCT NAME 25 HP - TE - 1775 PHASETYPE 3_PHASE MOTOR ENCLOSURE TE HORSEPOWER 25 KILOWATTS 18
85 kW) Number of Poles 8/4 Frequency 60 Hz Rated speed 875 rpm Slip 2
2 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 16 AWG Motor Type 3632M Mounting Arrangement F1 Number of Poles 4 Overall Length 18
0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals WEEE CULUS Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator No Mounting Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 2
33 % Rated voltage 380 V Rated current 100 A L
Catalog Number EM2554T-4CI Enclosure DP Frame 404TS Frame Material Iron Frequency 60
Bando - TL22H300 The type of pulley used on a Synchro-Link® drive depends on a number of factors
D XP Division Division I Agency Approvals UL CSA EEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 17
8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3734M Mounting Arrangement F1 Number of Poles 4 Overall Length 17
Catalog Number EM2534T-G Enclosure OPSB Frame 284TS Frame Material Steel Frequency 60
Amperes 3373 A LRC 8
Bando - 8-5V1020 To resolve problem applications where belts are flipping over or jumping out of the sheaves
