Bando P14H100 JA QD Timing Belt Pulley (JA) Oil BurnerBando P14H100 JA The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Frame 364/5JP Output 60 HP (45 kW) Number of Poles 4 Frequency 60 Hz Rated speed 1777 rpm Slip 1
0 a Frame Prefix D Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 10 AWG Motor Type 0960M Mounting Arrangement B3 Number of Poles 4 Overall Length 23
2 LB-FT Starting Current 197 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
625 MOTOR TYPE FHP AMBIENT 60 ROTATION CW LEAD END RUNCAPMFD 30 RUNCAPVOLTS 370 SHIPPING WEIGHT 31 BREAKDOWN TORQUE 131
Bando - 10-5V2240 To resolve problem applications where belts are flipping over or jumping out of the sheaves
94 % Rated voltage 230/460 V Rated current 24
5 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 32
000 HP Agency Approvals CCSA US Ambient Temperature 40 °C Armature Current 17
lb Locked rotor torque 160 % Breakdown torque 200 % Locked rotor time 27s (cold) 15s (hot) Moment of inertia (J) 2
CenturyCO1553
207 Ib Downloads
6 POLES 2 NUMBER SPEEDS 1 RPM 3550 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 365 SHAFT CODE TS MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE FD OPPOSITE END BEARING 6212-2Z-J/C3 SHAFT END BEARING 6212-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1
