Bando M 2 3/4 QD BORE 2 3/4 (2.750) DS14M

Bando M 2 3/4 QD BORE 2 3/4 (2.750) DS14MBando M 2 3 4 The original sheave and pulley mounting system developed to facilitate installation and replacement of components. The QD (Quick Detachable) design provides for both conventional (flange outboard) and reverse (flange inboard) mounting configurations.

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3518M Mounting Arrangement F1 Number of Poles 4 Overall Length 12

5 RPM 3450 FRAME 145JM SER

3x(Code H) No load current 55

Nominal Outside Length (In)91

959 mH Armature Inertia 30

45 LB-FT Starting Current 7

624 IN Shaft Ground Indicator Shaft Grounding Shaft Rotation Reversible Speed 1175 rpm Motor Standards NEMA Thermal Device - Bearing None Thermal Device - Winding Normally Closed Thermostat Drawings

25 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2730 rpm Slip 9

Catalog Number M3541-57 Enclosure TEFC Frame 56C Frame Material Steel Frequency 50

761 Ohms A Ph / 0 Ohms B Ph Temp

105 A Mounting position Front Quantity contacts / Configuration 1 NC Operating / insulation voltage Ui max=660/690 Volts Terminal type With screw

EM2333T-BG SPEC 09K909T597G1 HP 15 VOLTS 230/460 AMPS 36