Baldor VEM4106T 20HP, 3520RPM, 3PH, 60HZ, 256TC, 0936M, TEFC, F OTHERS

Baldor VEM4106T 20HP, 3520RPM, 3PH, 60HZ, 256TC, 0936M, TEFC, F OTHERSSpecs Catalog Number VEM4106T Enclosure TEFC Frame 256TC Frame Material Iron Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency 20. 000 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 3600 RPM @ 60 HZ Voltage @ Frequency 230. 0 V @ 60 HZ 208. 0 V @ 60 HZ 460. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CSA EEV Ambient Temperature 40 C Auxillary Box No Auxillary Box

1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 0944M Mounting Arrangement F1 Number of Poles 4 Overall Length 24

CECP3774T SPEC

42 % Rated voltage 230/460 V Rated current 115/57

0 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 3

Front type Illuminated double flush (IP66) Actuation form Pulsator Front color Green/Red Actuation signaling Not contain Front coating Metalized Specific function On/Off (I/O) Installation diameter 22 mm Degree of protection IP66 Weight 0

55 IN Power Factor 67 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None Service Factor 1

Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230/460 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Output rating 15 HP Mounting F-1 Flange C Terminal box¹ Left position Enclosure IC411 - TEFC Electric Motors

3 POLES 6 NUMBER SPEEDS 3 RPM 1075 HERTZ 60 VOLTS PRIMARY 208-230 VOLTS 208 VOLTS 2 230 FRME 48 SHAFT CODE Y STATOR DIAMETER 5

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code H Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3524M Mounting Arrangement F1 Number of Poles 4 6 Overall Length 12

lb Locked rotor torque 229 % Breakdown torque 320 % Locked rotor time 43s (cold) 24s (hot) Moment of inertia (J) 44

5 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 4038M Mounting Arrangement F1 Number of Poles 6 Overall Length 23

weight³ 5321 lb Efficiency