Part # 15602-04/04-20 (Bussmann Fuse Block for ATOF/ATC Fuses or Blade Type Circuit Breakers. Maximum Current Rating For All Circuits is 200 Amps) Circuit Breaker

Part # 15602-04/04-20 (Bussmann Fuse Block for ATOF/ATC Fuses or Blade Type Circuit Breakers. Maximum Current Rating For All Circuits is 200 Amps) Circuit BreakerBussmann Fuse Blocks are heavily used in the Automotive Industry. They will accept ATOF ATC and blade type circuit breakers. These compact Fuse Blocks are surface mounted and this Fuse Block is a double Four position and will handle 100 amps maximum per 4 Position module for a total of 200 amps maximum for both four position modules. They come with a #10 KEPS nut on the (2) power studs ready to use. Click Here For Spec Sheet

and tighten down with screws built into the Terminal Blocks

We have (2) different sets of Face Plates:

Single Pole Single Throw

Bussmann Fuse Blocks are heavily used in the Automotive Industry

Six Position panels have been built and sold for many years for the Emergency Vehicle Marketplace with the same old designs with very little improvement

The Road Runner Switch Panel comes with an external ATO Fuse Block on the back of the Panel with ATO Fuses attached

we have eliminated the cumbersome wire harness and replaced it with a Euro Style Terminal Block where all you have to do is strip your incoming wires

These compact Fuse Blocks are surface mounted and this Fuse Block is a double Four position and will handle 100 amps maximum per 4-Position module for a total of 200 amps maximum for both four position modules

Road Runner Connect

200 Amps Current Rating

***This unit comes without ATO Fuses***

They come with a #10 KEPS nut on the power stud ready to use