Bando 100-S2M-1274 S2M-1274 Timing Belt HYDRAULIC PUMP

Bando 100-S2M-1274 S2M-1274 Timing Belt HYDRAULIC PUMPBando 100 S2M 1274 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like sized drives having the standard high torque tooth profile. Smoother tooth engagement and direct contact of belt tooth top with the pulley grooves enables the belt to run quietly even at high speeds. As the tooth meshes with the pulley grooves, the cord lay forms an almost true circle, minimizing the cantilever effect on the cords,

Standard NEMA MG-1 Frequency 60 Hz Voltage 460//380-415 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 15 HP Mounting B3L(E) Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC

0 a Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code G Lifting Lugs Standard Lifting Lugs Motor Lead Quantity/Wire Size 3 @ 4 AWG Motor Type A36062M Mounting Arrangement F1 Number of Poles 4 Overall Length 29

Flange Size FC-355 Sealing Type Not Applicable Bearing Size Bearing 322 Products Line W22 Downloads

@ 25° C 15

1725 34WG5724 HZ 60 SER

CEWDM3550-H SPEC

75 MOTOR TYPE UT ROTATION REVERSIBLE SHIPPING WEIGHT 26 BREAKDOWN TORQUE 141

Rated Load Load Point 1 2 3 4 5 6 7 Armature Amps 0

5 A Rated operational Current Ie AC-1 (¿ = 55 ºC) 20 A Rated operational voltage Ue - IEC 60947-4-1 690 V Rated operational voltage Ue - UL/CSA 600 V Height 58 mm (2

6x(Code H) No load current 14

875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1775 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Part Winding Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

Amperes 222 A LRC 6