Bando 564XL025G XL Timing Belt Submersible ElevatorBando 564XL025G The extra durable, highly flexible neoprene backing provides excellent abrasion and wear resistance especially important if power is transmitted from the back of the belt. Backing also guards the tensile cords against oil, grease, dirt, and moisture. Continuous, helically wound high strength fiberglass tensile cords guarantee dimensional stability to eliminate take up adjustments. Heavy torque loads wont fatigue this super strong cord.
SPEC 34-0000-0390 CAT
3 STACK 4 MOUNTING FACE/BASE MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 40 ROTATION REVERSIBLE SERVICE FACTOR 1
15 STARTCAPMFD N\A SHIPPING WEIGHT 750 BREAKDOWN TORQUE 211 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 145 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 340
weight³ 2265 lb Efficiency
Load 59° C Start Configuration DOL Break-Down Torque 235 LB-FT Pull-Up Torque 92
lb Locked rotor torque 229 % Breakdown torque 229 % Locked rotor time 48s (cold) 27s (hot) Moment of inertia (J) 254 sq
Nominal Outside Length (mm)3727
1 POLES 4 NUMBER SPEEDS 1 RPM 1760 RPM 2 1755 HERTZ 60 VOLTS PRIMARY 200/208 VOLTS 208 VOLTS 2 200 FRME 145 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6205-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
Bando - 990L40 Rib Ace® is an ultra-thin
875 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed 3450 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T4 Drawings
1 LB-FT Starting Current 14
9 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 16 AWG Motor Type 3622M Mounting Arrangement F1 Number of Poles 2 Overall Length 13
