Century OGD1016 OEM Replacement Motor, 1/6 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, ENCLOSED HYDROWASH

Century OGD1016 OEM Replacement Motor, 1/6 HP, 1 Ph, 60 Hz, 208-230 V, 1075 RPM, 1 Speed, 48 Frame, ENCLOSED HYDROWASHOEM Direct Replacement Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 5 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Totally Enclosed Air Over Class B Insulation, 40C Ambient Design Upgrade, Converting From Sleeve Bearing to Ball Bearing 1 2" Diameter Shaft with Flat 40" Leads with Female Spade Terminals Extended Studs Lead End, Vertical Shaft Down Additional Information Thermal ProtectionAutomatic

85 kW) Number of Poles 8/4 Frequency 60 Hz Rated speed 875 rpm Slip 2

7 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 1800 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 0526M Mounting Arrangement F3 Number of Poles 6 Overall Length 14

90 A Rated torque 11

0581 Ohms A Ph / 0 Ohms B Ph Temp

6 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Ring Terminals Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 0944M Mounting Arrangement F1 Number of Poles 4 Overall Length 25

UL approval UL489 Trip curve D Number of poles 1 pole Rated current 5 A Maximum voltage 277 VAC / 60 VDC Type Thermal-magnetic Downloads

Output HP1/6

0 V Duty Rating CONT Feedback Device NO FEEDBACK High Voltage Full Load Amps 597

Amperes 1477 A LRC 8

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 6-60 Current @ Voltage 140

26 BREAKDOWN TORQUE UOM OZFT LOCKED ROTOR TORQUE 4

Material CARBON STEEL Products Line W21