18x Old Drill Bits Set p16

18x Old Drill Bits Set p1618x old drill bits in its bit roll (x17 shown in photo). All of these bits came in this tool roll from a previous owner. Includes: Russell Jennings (x1) John Wilson, Sheffield Robt Sorby Thos Ibbotson They have the traditional square tapered ends with the exception of two of the smaller bits which the previous owner has adapted (the 4th and 5th ones from the left). Condition: please see photos for condition.

London rule with various imperial measurements and a super

Comes with cap iron

1x Wood Carving Tool - Fishtail - Shallow Gouge - 9mm

This nutcracker also makes a good crocodile ornament

Condition: I was wondering if the hole at the top where the spring is should maybe have a screw however there is no thread in the hole or at the end of the hole so I am guessing the hole is a design feature

Overall Length: 9 1/2 (241mm)

This old Stanley drill looks to have seen very little use

Picture Size: A6

is inscribed

two of the teeth on the larger saw have tips broken off otherwise all teeth present

Lengths: 6" - 7" approx

Overall width: 68mm (2 5/8")