Baldor L3703 2HP, 1165RPM, 1PH, 60HZ, 3728LC, N MKT_WMO_US_TEXT_W21_MULTIMOUNTING

Baldor L3703 2HP, 1165RPM, 1PH, 60HZ, 3728LC, N MKT_WMO_US_TEXT_W21_MULTIMOUNTINGSpecs Catalog Number L3703 Enclosure TEFC Frame 213 Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Cap Start, Cap Run Output @ Frequency 2. 000 HP @ 60 HZ Phase 1 Synchronous Speed @ Frequency 1200 RPM @ 60 HZ Voltage @ Frequency 230. 0 V @ 60 HZ 115. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA UR Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base

Standard NEMA MG-1 Frequency 60 Hz Voltage 208-230/460 V Number of poles 8 Degree of Protection IP55 Synchronous speed 900 rpm Output rating 20 HP Mounting F-2 Flange Without Terminal box¹ Right position Enclosure IC411 - TEFC Electric Motors

6 LB-FT Starting Current 88

Frame Material Cast Iron Impregnation Method Dip and Bake Polyester Regreasing System At Drive end and Non-drive end Main terminal box hole NPT 1 1/2" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 3002 203A (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover With Overload protector (phenolic) Without overload protector Connection Cables Quantity 12 Features

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals UR CSA Ambient Temperature 50 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Current @ Voltage 28

5 MOUNTING C-FACE MOTOR TYPE FHP OPPOSITE END BEARING BALL SHAFT END BEARING BALL AMBIENT 50 ROTATION CCW DRIVE END RUNCAPMFD 50 RUNCAPVOLTS 370 SHIPPING WEIGHT 36 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 180

35 SHIPPING WEIGHT 26 THERMAL PROTECTION NONE BREAKDOWN TORQUE 72

UL approval UL1077 Trip curve D Number of poles 2 poles Rated current 30 A Maximum voltage 277/480 VAC Type Thermal-magnetic Attributes

CEWDM3713T SPEC

5 a Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready IP Rating NONE KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 2 Overall Length 15

5 A Maximum voltage 277/480 VAC Type Thermal-magnetic Attributes

3 POLES 8 NUMBER SPEEDS 1 RPM 825 HERTZ 60 VOLTS PRIMARY 208-230 VOLTS 208 VOLTS 2 230 FRME 48 SHAFT CODE Y STATOR DIAMETER 5

65 POLES 10 NUMBER SPEEDS 1 RPM 3450 HERTZ 50 VOLTS PRIMARY 115/230 VOLTS 115 VOLTS 2 230 FRME 56 SHAFT CODE J STACK 2