Rockford Fosgate P2-1X12 Motorcycle Amplifiers

Rockford Fosgate P2-1X12 Motorcycle AmplifiersThe P2 1X12 is a single P2 12 vented enclosure with 400 Watts RMS power handling wired to a 1 Ohm load. The enclosure is constructed with 5 8 MDF, covered in high density carpet, and features quick release compression terminals. The most convenient way to get low frequency bass in your system is to drop in a Punch Loaded enclosure. We're not talking junk in the trunk, we're talking the same genuine Punch woofers available separately. Punch Loaded

this system is weatherproof and built to deliver years of listening enjoyment

the system includes two woofers with grilles

5" (165 mm) Component Woofer (with Grille)

8V Sinewave) 60 A Suggested Alternator 75 A Included In The Box Yes Dimensions (H x W x D) 2

Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4ohms

Download  MMR-20-BE Product Manual

Universal applications

04 (cm)   Shipping Weight 9

Fully insulated silicone tinsel leads

0% @ 2Ω Signal Input - Front Channels: 1 RCA Pair - Rear Channels: 1 RCA Pair - Input Switch: 2CH / 4CH Signal Output 1 RCA Pair Tone Controls Front & Rear Channels: - Treble: 0dB to +12dB @ 12kHz - Bass: 0dB to +18dB @ 45Hz (Function depends on crossover setting: LP/AP/HP) Crossover Controls Front & Rear Channels: - High-Pass (HP): 50Hz - 500Hz @ 24dB/octave Butterworth - Low-Pass (LP): 50Hz - 500Hz @ 24dB/octave Butterworth Remote Controls Optional Remote PEQ (Overrides Rear Channel Built-in Punch EQ) Visual Indicators - Power: Blue LED - Thermal: Red LED - Protect: Yellow LED Power Wire Gauge 4 AWG Power Input Connector Block Speaker Wire Gauge 8 AWG - 16 AWG Speaker Output Connector Block Cooling Convection Heatsink — Operating Voltage 9 - 16 VDC Recommended Fuse (Not Included) 150A Average Current Draw (13

8V Music) 27 A Max

5 Mounting Depth 3