Bando P40-8M-30 HT QD Timing Belt Pulley (SH) Automotive Duty UFrameBando P40 8M 30 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
7 RPM 3450 FRAME 56YZ SER
Load 60° C Start Configuration DOL Break-Down Torque 283 LB-FT Pull-Up Torque 131 LB-FT Locked-Rotor Torque 156 LB-FT Starting Current 178 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S
7 lb Efficiency
Amperes 2974/1724 A LRC 6
15 STARTCAPMFD N\A SHIPPING WEIGHT 120 INSULATION CLASS F KVA CODE LETTER H NEMA NOMINAL EFFICIENCY 81
Catalog Number PSC3416A Enclosure TEAO Frame 48Z Frame Material Steel Frequency 60
XL14142T HP 1 VOLTS 115/230 AMPS 12
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 3420 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
weight³ 375 lb Efficiency
66 A Rated torque 8
06 IN Power Factor 74 Product Family Wash Down Pulley End Bearing Type Sealed Bearing Pulley Face Code C-Face Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 2 Overall Length 13
