Safety-Pin Shackles Hot Dip Galvanized 1-1/2 flat_head_cap_screw

Safety-Pin Shackles Hot Dip Galvanized 1-1/2 flat_head_cap_screwA bolt fastened with a nut and cotter pin makes these shackles more secure than screw pin shackles. Also known as anchor and bow shackles, the wide body provides room to attach multiple connectors. Galvanized steel shackles have a thick coating for corrosion resistance. Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the shackle can lift is significantly reduced.

This hexagonal bolt has a length of 8" with a threading of 5/8-18 [Partially Threaded]

As the lift angle changes from vertical

The screw has a length of 20 and a diameter of 5/8

This hexagonal bolt has a length of 3-3/4" with a threading of 7/8-9 [Partially Threaded]

The screws have a thread of 1-1/4-7 and a length of 4

The screws have a thread of 1-1/2-6 and a length of 6

The handles are colored rouge

This hexagonal bolt has a length of 8" with a threading of 7/8-9 [Partially Threaded]

The inside threads have a 3-8 thread

The elbows have a 1 thread and they are 90 degrees

The screw has a length of 1" and a thread of 5/8-11

The crosses have a thread of 1-11-1/2 and a pressure of 150 psi