Bando 8-5VK2000 Power Ace Aramid Combo IgnitersBando 8 5VK2000 Power Ace Aramid Combo resolves flipping or jumping problems To resolve problem applications where belts are flipping over or jumping out of the sheaves, utilize Bandos series of Combo belts. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and permanently welds the individual belts together. Combos
319 A Rated torque 0
Catalog Number EJMM2534T-G Enclosure OPSB Frame 284JM Frame Material Steel Frequency 60
67 % Rated voltage 200 V Rated current 70
5x(Code G) No load current 137 A Rated torque 1160 ft
0 a Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Drip Cover No Drip Cover Duty Rating CONT Feedback Device NO FEEDBACK Field Winding Type STAB SHUNT Frame Prefix LC Heater Indicator No Heater Insulation Class F Lifting Lugs Standard Lifting Lugs Mounting Arrangement F2 Overall Length 41
Standard NEMA MG-1 Frequency 60 Hz Voltage 575 V Number of poles 2 Degree of Protection IP55 Synchronous speed 3600 rpm Output rating 2 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC Electric Motors
3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Not Inverter IP Rating NONE KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3530M Mounting Arrangement F1 Number of Poles 4 Overall Length 12
7 POLES 6 NUMBER SPEEDS 1 RPM 1160 HERTZ 60 VOLTS PRIMARY 575 VOLTS 575 FRME 145 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CE OPPOSITE END BEARING 6205-J/C3 SHAFT END BEARING 6205-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
50 % Rated voltage 240/415 V Rated current 4
2 RPM 1725 HZ 60 SER
125 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1775 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Part Winding Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
Amperes 1848 A LRC 5
