In-Mould Graphics - Graphics are integrated into rotational moulded parts. guitar players

In-Mould Graphics - Graphics are integrated into rotational moulded parts. guitar playersThese graphics are fully integrated into the surface of rotational moulded parts during the moulding process. The graphics sit flush with the surface and can not be scratched off. The graphics do not fade in sunlight and have similar chemical resistance as the moulding material. Used for: Inmoulded graphics are used to apply company and product logos, warning labels, serial numbers, barcodes, recycling information, and instructional usage graphics.

You can get an acrylic plate with a cured "F" - see the picture

35 mm and 2

is applied in a vacuum plasma process

The sample measures 90 mm x 90 mm x 20 mm

It can also be used to hang posters on painted walls without damaging the paint

These honeycomb sheets are produced in a continuous process by thermoforming

sporting goods

Sheep wool is naturally resistant to mould and it can also be treated with insecticides to avoid attacks from moths and other insects

Applications for expanded glass beads:

The capillary action works only with liquids that will wet the surface of the glass

The blue particles will start to flow into the white area if the indicator is tilted more than ~80 degrees

The inner side of the fabric is treated to be more hydrophobic than the outer side and there is therefore a hydrophilicity gradient through the thickness of the fabric (gradation of surface tension)