Bando 3-11MS950 Banflex Combo PlenumBando 3 11MS950 Ideally suited for short center distances and small diameter pulleys, BanFlex Combos banded construction minimizes or eliminates the turnover problem normally associated with small cross section belts. The ribbed construction provides superior flexibility while maintaining lateral stability. Precision molded, seamless polyurethane ribs provide maximum resistance to oil and traditional lubricants with virtually vibration free operation.
82 LB-FT Starting Current 9
lb Locked rotor torque 270 % Breakdown torque 300 % Locked rotor time 27s (cold) 15s (hot) Moment of inertia (J) 41
0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code J Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 18 AWG Motor Type 3544M Mounting Arrangement F3 Number of Poles 4 Overall Length 16
Catalog Number EHM2547T Enclosure OPSB Frame 364T Frame Material Steel Frequency 60
15 STARTCAPMFD N\A SHIPPING WEIGHT 137 BREAKDOWN TORQUE 286 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 168 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 56
15 STARTCAPMFD N\A SHIPPING WEIGHT 310 BREAKDOWN TORQUE 222 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 183 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 176 NEMA NOMINAL EFFICIENCY 91
2 kW) Number of Poles 8 Frequency 50 Hz Rated speed 720 rpm Slip 4
Nominal Outside Length (mm)1422
STAMPED X HW4600B31SP V-RING SLINGER 1
Bando - SPA1180 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards
Bando - P60-14M-55 The type of pulley used on a Synchro-Link® drive depends on a number of factors
875 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 1740 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding Do Not Use Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 Manual Thermal Overload Winding Thermal 1 Location KO Winding Thermal 2 None Drawings
