Century FSE1016 Condenser Fan Motor, 1/6 HP, 1 Ph, 60 Hz, 208-230 V, 1075/750 RPM, 1 Speed, 48 Frame, ENCLOSED Severe Duty

Century FSE1016 Condenser Fan Motor, 1/6 HP, 1 Ph, 60 Hz, 208-230 V, 1075/750 RPM, 1 Speed, 48 Frame, ENCLOSED Severe DutyCondenser Fan Heat Pump Refrigeration Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 5 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Totally Enclosed Air Over Class B Insulation, 60C Ambient Sleeve Bearing 1 2" Diameter Shaft with Double Flat 27" Leads Extended Studs Shaft End and Lead End Additional Information Thermal ProtectionAutomatic Speed1075 750 rpm Current0. 9 A Number of Speeds1 Ambient

Start Type Direct Three-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 480V50/60HZ Control devices A-On-Off Button Degree of protection TYPE1 Starters Complements Does Not Contain Rated current (AC-3) 9A (CWB9) Overload relay 2

1 a Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter IP Rating NONE KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Type 3524L Mounting Arrangement F1 Number of Poles 4 Overall Length 15

Catalog Number M1209T Enclosure OPEN Frame 213T Frame Material Steel Frequency 60

Model_Number S063JFY8120012B PRODUCT NAME

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals BLUETOOTH CULUS WEEE Ambient Temperature 40 °C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Blower None Constant Torque Speed Range 6 Current @ Voltage 8

2 a Front Face Code Encoder/Feedback Device Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Duty KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 6000 rpm Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 16 AWG Motor Type 0640M Mounting Arrangement F1 Number of Poles 4 Overall Length 21

Energy Efficient C Face

lb Locked rotor torque 240 % Breakdown torque 310 % Locked rotor time 111s (cold) 62s (hot) Moment of inertia (J) 0

Double Shaft Direct Drive Blower

0 V Design Code - Drip Cover Drip Cover Duty Rating CONT Efficiency @ 100% Load 68

36-0000-0231 HP 3 VOLTS 230/460 AMP 8

36F984-2761 HP 3 VOLTS 115/230 AMP 32/16 RPM 1725 FRAME 184TC SER