Fasco D119 Fan and Blower Motor, 1/11-1/25-1/70 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 3 Speed, 4.4" Diameter, OAO W22 BRAKE MOTOR

Fasco D119 Fan and Blower Motor, 1/11-1/25-1/70 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 3 Speed, 4.4" Diameter, OAO W22 BRAKE MOTORGeneral Purpose Motor 4. 4" Diameter Shaded Pole Thermally Protected Open Shaft End and Opposite Shaft End End Frame, Enclosed Shell, Air Over Class B Insulation, 40C Ambient Ball Bearing 1 2" Diameter Shaft with Flat 30" Leads Extended Studs Shaft End Additional Information Thermal ProtectionThermally Protected Speed1500 rpm Current2. 9 1. 5 1. 0 A Number of Speeds3 Ambient Temperature40 C ULRecognized Insulation ClassB CSAY Weight6. 90 LB Country Of

4 A Rated torque 107 ft

0 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 16

RESCUE® EZ16™ ECM

1 POLES 6 NUMBER SPEEDS 1 RPM 1185 HERTZ 60 VOLTS PRIMARY 460 VOLTS 460 FRME 447 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE RI OPPOSITE END BEARING 6313-J SHAFT END BEARING 6220-J AMBIENT 40 SERVICE FACTOR 1

25 3 Parts

0 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Termination Flying Leads Motor Type 1056M Mounting Arrangement F1 Number of Poles 4 Overall Length 28

67 VOLTS 460 AMP 2

EHM2547T SPEC

59 LB-FT Locked-Rotor Torque 9

lb Locked rotor torque 210 % Breakdown torque 250 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 90

8 RPM 1760/875 FRAME 256T SER

M1206T SPEC