Raymarine 3M Backbone Cable f/SeaTalkng [A06035] Brand_Ancor

Raymarine 3M Backbone Cable f/SeaTalkng [A06035] Brand_AncorBackbone Cables In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone

Note: Not for Freedom HF or Freedom SW Series

Fixed-Mount Autopilot System

2 - Hanks Black Braided Line

3001 HD-Series Battery Switch Single Circuit ON/OFF with AFD

Box Dimensions: 7"H x 15"W x 22"L WT: 8 lbs

UPC: 873804002309

UPC: 719441200152

Maretron's ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network

Termination Resistors are required on a NMEA 2000 network and are placed at each end of a network trunk cable

Diameter: 5-1/4"

Stainless steel Phillips screws for easier installation and resistance to stripping

Box Dimensions: 9"H x 11"W x 16"L WT: 19