Cylinder KWH #3 Horizontal Bolting Red handle

Cylinder KWH #3 Horizontal Bolting Red handleCylinder, position #3 (non side of switching valve). Fits model KEITH WORKHORSE (KWH). This cylinder is mounted with the bolts horizontal.

#2 or #3 of a KFD drive are interchangeable

The Check valve is mounted on the ends of the KEITH RUNNING FLOOR II (KRFII) cylinders

Pressure Filter

From cylinder to cylinder

Strap Nylon for KEITH CLEENSWEEP and KEITH V-SWEEP

Retract the CLEENSWEEP Tarp

Straight long connector for the check valve KEITH RUNNING FLOOR II DX (KRFII-DX)

Internal Check Valve of KEITH Workhorse Cylinder

This Clamp is for the Smooth part of the Cylinder

All 6 clamps are the same

View instructions

The KRFII drive has four equal check valves (CKV) and can be interchanged