JL Audio MM105/MM100-PWR-PLUG-RP Bluetooth Receivers

JL Audio MM105/MM100-PWR-PLUG-RP Bluetooth ReceiversReplacement Power harness for MM105 and MM100s. Deutsch Connector with Power, Ground, Illumination and Remote wires.

rear-seat entertainment system includes: two 10

20 Hz - 20 kHz noise bandwidth) Damping Factor @ 4 ohms >115 / 50 Hz Damping Factor @ 2 ohms >54 / 50 Hz THD+N @ Rated Power <1% @ 2 ohms Input Voltage Range @ RCA Inputs Switchable from 250 mV - 4 V RMS (Low) to 750 mV - 15 V RMS (High) Min

5" tweeter with integral 6dB high Pass crossover engineered for high SPL (Sound Pressure Level) conditions

@ 4 ohms 160 W RMS x 1 @ 3 ohms 200 W RMS x 1 @ 2 ohms 250 W RMS x 1 @ 1

with the appropriate JL Audio TüN® Software application installed

Filter Mode(s) Low-Pass or High-Pass Filter Slope(s) 12 dB/octave Filter Frequency Range 50 Hz - 500 Hz Detented

mounting hardware included

set-up procedure to adjust amplifier gains

you can control the subwoofer output directly from the driver’s seat

Runabouts and Towboats where amplifier location is 10 feet (3 m) from battery

Carbon fiber & polypropylene injection molded cone

SlamPak® Audio System with M6 Speakers for Select 2019–2024 Polaris RZR Models with Ride Command