Zoo Hardware Rosso Tecnica RT010 Lugano Slim Lever Handle Set FINISH:Antique Brass

Zoo Hardware Rosso Tecnica RT010 Lugano Slim Lever Handle Set FINISH:Antique BrassZoo Hardware Rosso Tecnica RT010 Lugano Slim Lever Handle Set A pair (set of two) Zoo Hardware Rosso Tecnica RT010 Lugano 19mm diameter mitred lever handles with concealed fixing sprung roses, 8mm spindle bar, supplied complete with bolt through fixings to suit doors 35 54mm thick. Successfully fire tested in accordance with the requirements of BS EN 1634 1, suitable for use on timber fire doors up to 60 minutes when combined with the ZIRTS30 60G

248mm Diameter

Use with a rim lock or a mortice lock

A set of two black iron rustic 'Ashfield' design lever handles on back plate

The distance between the centres of the lever handle and WC set is 78mm which aesthetically when viewed on a door is less cramped than conventional UK locks

32mm Wide Rose

226mm x 53mm

From the Anvil Reeded Lever on Plate

A pair (set of two) Atlantic 'Crest' Eco designer lever on round concealed fixing rose

JNF Drive Black Natural Leather Lever Handle

The minimum position for the top (with 5mm wiring cable pass through channel) and bottom pivot is 40mm from the door edge although it can be positioned anywhere towards the centre line of the door (see diagram shown above)

A stainless steel and oak wood window handle

Heavy duty DIN European mortice strongly sprung europrofile cylinder sash lock case with two-piece 24mm wide Square forend and anti-rattle striking plate (with black boxed keeps)