STL Planter mold DIY — Classic Planter — x3 Sizes (50/100/150 ml) — 3D-printed Housing Frame for silicone mold making. Concrete succulent Planter

STL Planter mold DIY — Classic Planter — x3 Sizes (50/100/150 ml) — 3D-printed Housing Frame for silicone mold making. Concrete succulent PlanterFinished improvements on the V2 formwork for the Planter moldThere were actually many more versions, lots of testing, spent filament and silicone. Now I can definitely say you will not find on the internet a more well thought and easy to use mold. This is the easiest way to start your silicone molds! I designed the most practical and simple mold for creating Classic Planter that can also be used as a container for candles, it has a nest at the bottom

Wall thickness — 4 mm (0

stl• An M5 nut must be inserted and glued to the bottom of the master model• This allows the master model to be screwed securely to the bottom of the formwork with a countersunk M5×12 mm screw

similar to stopping down the aperture

• These models are based on extensive experience in designing and producing silicone molds — hundreds of hours of 3D modeling and printing

• Use a non-silicone release spray such as Ease Release 200 for easy first demolding• Vacuum the silicone before pouring to remove air bubbles

Product info

14)=296 g)

and the model thickness is optimized for 0

I tested the ingredients available in my country

6mm width perimeter printing in two passes

— ready for demolding after an 1 hour

Classic Recipe for Concrete and Plaster (Gypsum) — Quick and Easy