XTool F1 (~2.5") To 4 Inch (101mm) Hose Adapter creality enclosure

XTool F1 (~2.5") To 4 Inch (101mm) Hose Adapter creality enclosureBuild your custom smoke and fume extraction system with hose adapters allowing you to transition between various size hoses. This part allows you to connect the XTool flexible hose (~2. 5") to a 4 inch (~101mm) hose for the purpose of smoke and fume extraction of your laser cutter and engraver. This will typically work with the XTool F1 or the XTool smoke and fume purifier. If you are connecting a 4" hose directly to the back of the F1, use the white

This fixture holds the most common size brass name plate for batch processing

check out the XTOOL F1 ULTRA (link below)

Links to various workpiece options below

IF YOU HAVE THE D1 Pro 2

It is a drop in replacement

The XTool F1 is compatible with the XTool RA2 rotary module which would allow you to process cylindrical objects

the bubble level is rectangular and oftentimes will slip off of round objects and needs to be held in place while making adjustments to the workpiece angle (made possible with the Embrace Making RA2 Pro Tilt Mechanism)

this is a uniform force across the entire build surface resulting in a very flat surface

It does not contain the laser module itself

This unique and inexpensive vacuum fits onto the top of a standard 5 gallon bucket / pail

Therefore the passive nature of the filter makes it less than ideal

many of the available ornaments come in wood which works well with the blue diode laser